Smithy Ez-Trol2 Instrukcja Użytkownika Pobierz pdf (Strona 59)

www.smithycnc.com | 53

N20G04 P5.0

Block 20 paused the machine, G04 for period of five seconds, allowing the spindle to come up to

peed.

N21G43Z1.H2

lock 21 turns on tool length compensation using the height of tool number 2 in the tool table.

N22Z-.25

Block 22 positions the cutter at Z-.25.

N23G1Z-.35F1.08M08

Block 23 Feeds the drill to Z-.35 at the feed rate of .08 and turns the coolant on (M08).

N24G1G41X1.325Y.925D2F115.51

Block 24 moves the end mill in a line (G1). Simultaneously, tool diameter compensation (left) is

started (G41). D2 is the diameter value for tool number 2 in the tool table the end mill is moved to

X1.325, Y .925 and tool radius value is interpolated into the tool path over the course of the move.

The tool is fed at a rate of 115.51.

The block numbers N26 through N50 cut the rectangular pocket in our part.

N25X1.425

N26Y1.075

N27X1.325

N28X1.125

N29Y.725

N30X1.625

N31Y1.275

N32X1.125

N33Y1.075

N34X.925

N35Y.525

N36X1.825

N37Y1.475

N38X.925

N39Y1.075

N40X.725

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 82 83

Brak uwag

Smithy Ez-Trol2 Instrukcja Użytkownika Strona 59